Check Lists
下面的检查清单是为方便模拟飞行员而设计的，并根据X-Plane A330-300飞机进行了定制。这些与真实飞机的检查清单有所不同。
Cold and Dark to Engine Start 从冷舱状态到发动机起动
以下检查清单是真实程序的子集，仅包括从冷舱状态到发动机起动所需的基本步骤：
PARKING BRAKE - ON
TRANSPONDER - STANDBY
BAT1 - ON
BAT2 - ON
(EXTERNAL POWER) EXTA - ON
BEACON - ON
NAV LIGHTS - ON
APU BATTERY ON
APU MASTER - ON
APU - START
Wait for APU startup. (APU AVAIL displayed)
支 持 本 站: 捐赠服务器等运维费用，需要您的支持！
APU GENERATOR - ON
(EXTERNAL POWER) EXTA - OFF
ADIRS
IR1 / IR2 / IR3 - ON
ADR1 / ADR2 / ADR3 - ON
ADIRS Rotaries - NAV
(PNUMATIC AIR CYCLE KIT) PAX SYSTEM - ON
APU BLEED - ON
Using the MCDU
点击CLR按钮
[从草稿栏中删除CHECK DATA BASE CYCLE]
点击INIT按钮以调用INIT页面
在草稿栏中键入起点/终点的ICAO代码（用斜杠"/"分隔）
示例显示为KJFK/KBOS
点击行选择键1R以填充FROM/TO字段框
示例显示为KJFK/KBOS
仅在草稿栏中输入飞行高度（温度将自动填充）
示例显示为Flight Level 240 / 24,000 ft
点击行选择键6L以填充CRZ FL/TEMP字段框
可选择将航班号输入到草稿栏中
点击行选择键3L以填充
示例显示为AA300
点击PERF按钮以选择飞行阶段性能页面
将计算得到的V1速度输入到草稿栏中
点击行选择键1L以填充此项
按照相同步骤分别输入VR和V2速度
提示：如果您没有计算V速度的方法，可以使用"Flap Retraction"速度作为V2，VR为V2减去5，V1为V2减去10
将起飞时所需的襟翼位置（1或2）输入到草稿栏中
点击行选择键3R以填充此项
提示：这只是提醒飞行员适用于该情况的起飞襟翼设置。如果您的V速度是根据前一步骤中的襟翼收回速度计算得出的，请使用"2"。
FLIGHT CONTROL SYSTEMS - ALL ON
GROUND PROXIMITY (GPWS) AURAL ALERTS - ALL ON
HYDRAULIC / FUEL PUMPS - ALL ON
ELECTRICAL / BUS TIE - ON
Engine Start
ENGINE START (ROTARY)
IGN START
ENG START
ENG2 - ON
MONITOR ENGINE 2
DIAGNOSTICS
WAIT FOR ENGINE 2 TO STABILIZE
ENG START
ENG1 - ON
MONITOR ENGINE 1
DIAGNOSTICS
WAIT FOR ENGINE 1 TO STABILIZE
ENGINE START (ROTARY)
NORM
ENGINE GENERATOR 1 - ON
ENGINE GENERATOR 2 - ON
APU GENERATOR - OFF
APU BLEED - OFF
ENGINE 1 BLEED - ON
ENGINE 2 BLEED - ON
ENGINE 1 PACK - ON
ENGINE 2 PACK - ON
APU MASTER - OFF
Before Taxi
SEATBELT SIGN - ON
TAXI LIGHTS - TAXI
TRANSPONDER - AUTO
PARKING BRAKE - OFF
FLAPS - AS REQUIRED
SPEED BRAKES - ARMED
AUTO BRAKES - MAX
Before Takeoff
ALTIMETER - SET
LANDING LIGHTS - ON
TAXI LIGHTS - TAKEOFF
STROBES - ON
After Takeoff
LANDING GEAR - UP
FLAPS - RETRACTED
THRUST - SET AS REQUIRED
SPEEDBRAKES - DISARMED
Cruise
SEATBELT SIGN - OFF
LANDING LIGHTS - OFF
TAXI LIGHTS - OFF
ALTIMETER - SET
Before Landing
SEATBELT SIGN - ON
ALTIMETER - SET
LANDING LIGHTS - ON
TAXI LIGHTS - TAKEOFF
Landing
SPEED BRAKES - ARMED
AUTO BRAKES - AS REQUIRED
FLAPS - AS REQUIRED
LANDING GEAR - DOWN
After Landing
FLAPS - RETRACTED
SPEED BRAKES - DISARMED
LANDING LIGHTS - OFF
TAXI LIGHTS - TAXI
Parking
PARKING BRAKE - ON
SEATBELT SIGN - OFF
TRANSPONDER - STANDBY
ENG START ENG1 - OFF
ENG START ENG2 - OFF
ELECTRICAL / BUS TIE - OFF
HYDRAULIC / FUEL PUMPS - ALL OFF
GPWS AURAL ALERTS - ALL OFF
FLIGHT CONTROL SYSTEMS - ALL OFF
(PNUMATIC AIR CYCLE KIT) PAX SYSTEM - OFF
ADIRS
IR1 / IR2 / IR3 - OFF
ADR1 / ADR2 / ADR3 - OFF
ADIRS Rotaries - OFF
(EXTERNAL POWER) EXTA - ON
BEACON - OFF
NAV LIGHTS - OFF
BAT1 - OFF
BAT2 - OFF
留言簿