Check Lists

下面的检查清单是为方便模拟飞行员而设计的，并根据X-Plane A330-300飞机进行了定制。这些与真实飞机的检查清单有所不同。

Cold and Dark to Engine Start 从冷舱状态到发动机起动 以下检查清单是真实程序的子集，仅包括从冷舱状态到发动机起动所需的基本步骤： PARKING BRAKE - ON

TRANSPONDER - STANDBY

BAT1 - ON BAT2 - ON

(EXTERNAL POWER) EXTA - ON BEACON - ON NAV LIGHTS - ON

APU BATTERY ON APU MASTER - ON APU - START

Wait for APU startup. (APU AVAIL displayed)

APU GENERATOR - ON

(EXTERNAL POWER) EXTA - OFF

ADIRS IR1 / IR2 / IR3 - ON ADR1 / ADR2 / ADR3 - ON ADIRS Rotaries - NAV

(PNUMATIC AIR CYCLE KIT) PAX SYSTEM - ON

APU BLEED - ON

Using the MCDU 点击CLR按钮 [从草稿栏中删除CHECK DATA BASE CYCLE] 点击INIT按钮以调用INIT页面

在草稿栏中键入起点/终点的ICAO代码（用斜杠"/“分隔） 示例显示为KJFK/KBOS

点击行选择键1R以填充FROM/TO字段框 示例显示为KJFK/KBOS

仅在草稿栏中输入飞行高度（温度将自动填充） 示例显示为Flight Level 240 / 24,000 ft

点击行选择键6L以填充CRZ FL/TEMP字段框

可选择将航班号输入到草稿栏中 点击行选择键3L以填充 示例显示为AA300

点击PERF按钮以选择飞行阶段性能页面

将计算得到的V1速度输入到草稿栏中 点击行选择键1L以填充此项 按照相同步骤分别输入VR和V2速度 提示：如果您没有计算V速度的方法，可以使用"Flap Retraction"速度作为V2，VR为V2减去5，V1为V2减去10

将起飞时所需的襟翼位置（1或2）输入到草稿栏中 点击行选择键3R以填充此项 提示：这只是提醒飞行员适用于该情况的起飞襟翼设置。如果您的V速度是根据前一步骤中的襟翼收回速度计算得出的，请使用"2"。

FLIGHT CONTROL SYSTEMS - ALL ON

GROUND PROXIMITY (GPWS) AURAL ALERTS - ALL ON

HYDRAULIC / FUEL PUMPS - ALL ON

ELECTRICAL / BUS TIE - ON

Engine Start ENGINE START (ROTARY) IGN START

ENG START ENG2 - ON

MONITOR ENGINE 2 DIAGNOSTICS WAIT FOR ENGINE 2 TO STABILIZE

ENG START ENG1 - ON

MONITOR ENGINE 1 DIAGNOSTICS WAIT FOR ENGINE 1 TO STABILIZE

ENGINE START (ROTARY) NORM

ENGINE GENERATOR 1 - ON

ENGINE GENERATOR 2 - ON

APU GENERATOR - OFF

APU BLEED - OFF

ENGINE 1 BLEED - ON ENGINE 2 BLEED - ON

ENGINE 1 PACK - ON ENGINE 2 PACK - ON

APU MASTER - OFF

Before Taxi SEATBELT SIGN - ON TAXI LIGHTS - TAXI TRANSPONDER - AUTO PARKING BRAKE - OFF FLAPS - AS REQUIRED SPEED BRAKES - ARMED AUTO BRAKES - MAX

Before Takeoff ALTIMETER - SET

LANDING LIGHTS - ON TAXI LIGHTS - TAKEOFF STROBES - ON

After Takeoff LANDING GEAR - UP FLAPS - RETRACTED THRUST - SET AS REQUIRED SPEEDBRAKES - DISARMED

Cruise SEATBELT SIGN - OFF LANDING LIGHTS - OFF TAXI LIGHTS - OFF ALTIMETER - SET

Before Landing SEATBELT SIGN - ON ALTIMETER - SET LANDING LIGHTS - ON TAXI LIGHTS - TAKEOFF

Landing SPEED BRAKES - ARMED AUTO BRAKES - AS REQUIRED FLAPS - AS REQUIRED LANDING GEAR - DOWN

After Landing FLAPS - RETRACTED SPEED BRAKES - DISARMED LANDING LIGHTS - OFF TAXI LIGHTS - TAXI

Parking PARKING BRAKE - ON SEATBELT SIGN - OFF TRANSPONDER - STANDBY ENG START ENG1 - OFF ENG START ENG2 - OFF ELECTRICAL / BUS TIE - OFF HYDRAULIC / FUEL PUMPS - ALL OFF GPWS AURAL ALERTS - ALL OFF FLIGHT CONTROL SYSTEMS - ALL OFF (PNUMATIC AIR CYCLE KIT) PAX SYSTEM - OFF

ADIRS IR1 / IR2 / IR3 - OFF ADR1 / ADR2 / ADR3 - OFF ADIRS Rotaries - OFF

(EXTERNAL POWER) EXTA - ON BEACON - OFF NAV LIGHTS - OFF

BAT1 - OFF BAT2 - OFF